Keyestudio 4WD Manual page 242

www.keyestudio.com
Hex file KS4031(4032) folder/Makecode
Tutorial/Makecode Code/Project
15：Servo.hex
Or you could edit code step by step in the editing area.
(1)Click " Variables" ; motor " Make a Variable name"create a variable named
"angle"; set the value to 0：
"on start"
(2)Click"Loops"to find and drag
and change the number to" 180 " ; click" MecanumRobot" to find and
drag
Project 15：Servo.hex
;
and put variable " angle " into
; and then put it into
to"forever"
; put
242