www.keyestudio.com
buttons(marked with A and B), and the one on the other side is a reset
button. By pressing the two programmable buttons can input three
different signals. We can press button A or B alone or press them together
and the LED dot matrix shows A,B and AB respectively. Let's get started.
(2)Experimental Preparation:
Connect micro:bit to computer with the USB cable
Open online Makecode editor
Import Hex profile (How to import?)
Or click"New Project"and drag blocks step by step
(3)Test Code
Code 1:
Press buttons on micro:bit, micro:bit will display character strings.
The route to get test
File Type
code(How to
load?)
Path
File Name
103