Keyestudio 4WD Manual page 158

www.keyestudio.com
The route to get test
File Type
Hex file KS4031(4032) folder/Makecode
Tutorial/Makecode Code/Project
Code/Project 8：Light Detection
Or you could edit code step by step in the editing area.
(1)A. Enter"Advanced"→"Serial"→"serial redirect to USB";
B. Drag it into"on start"block.
***************************************************************************
(2) A. Go to"Serial"→"serial write value x =0";
B. Move it into"forever"
A. Click"Input"→"acceleration(mg) x"
B. Put"acceleration(mg) x"in the"0"box and change "x"into"Light
intensity".
code（How to load?）
Path File Name
Project 8：Light
Detection
158