Keyestudio 4WD Manual page 129

www.keyestudio.com
File Type
Hex file KS4031(4032) folder/Makecode
Tutorial/Makecode Code/Project
Code/Project 6：
Geomagnetic Sensor-1
Or you could edit code step by step in the editing area.
A. Click"Input"→"more"→"calibrate compass"
B. Lay down it into block"on start".
A. Go to"Input"→"on button A pressed".
B. Enter "Basic" → "show number" , put it into "on button A pressed" block;
C. Tap "Input" → "compass heading(℃)" ， and place it into "show number"
*****************************************************************
Path File Name
Project 6：
Geomagnetic Sensor-1
129