FujiFilm Apeos C8180 Reference Manual page 6

(5) Insert the protrusions under the guide into the Paper Size
holes.
(6) Insert the Paper Tray protrusions into the Paper Size
holes on top of the guide and tighten the screw.
Pull the handle for the end guide up ( 1 ), align with the
(7)
Paper Size while moving the handle along the groove
( 2 ), and lower the handle ( 3 ).
Note
The groove on the left side of the end guide 8.5" is not used.
4. Fan the paper well and load sheets with the printed
side facing up, and the paper edges aligned in the di-
rection of the arrow.
5. Close the end guide completely.
6. Push in the Paper Tray.
Special Media Setting
■Hole Punched Paper
Orientation: Place the holes of paper on the right side when you face the front side of machine.
6
Optional Units
1
3
2