FujiFilm Apeos C8180 Reference Manual page 35

Paper Jams
Note
On CD2, the error indicator at the top of the Finisher is turned on. When the priority device indicator (top lamp)
blinks, first of all perform the paper jam operation.
If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on
the screen to remove the jammed paper.
Gently remove the paper being careful not to tear it. If paper is torn while it is being removed
from the machine, remove all the torn pieces making sure that none remain inside the machine.
When you have finished clearing the paper jam, printing is resumed from the state before the
paper jam occurred. If a paper jam occurred during copying, tap on [Start]. Copying is resumed
from the state before the paper jam occurred.
Note
Clear the paper jams while the machine is on.
1. Open the Cover.
2. Remove the jammed paper.
When Indicator E10 is Turned on...............................................................................................p.35
When Indicator E11 is Turned on...............................................................................................p.36
When Indicator E12 is Turned on...............................................................................................p.36
■When Indicator E10 is Turned on
(1) Open lever [2a] upward ( 1 ), open lever [2b] to the left
( 2 ), and remove the jammed paper ( 3 ).
(2) Return lever [2a] and lever [2b].
1
3
2
Folder Unit
35