Finisher D - FujiFilm Apeos C8180 Reference Manual

7

Finisher D

In this guide, "Finisher D6" and "Finisher D6 with Booklet Maker" are generally referred to as
"Finisher D".
Device Components / Caution Labels
Finisher
2 3
1
No. Component
Hole Punch Waste Container
1
Error Indicator
2
Booklet output button
3
4 Top Output Tray
Finisher Tray
5
6 Booklet Tray
Cover
7
8 Staple Waste Container
10 9 8 7
Punched pieces go in here.
Refer
For the discard method of waste in the waste container, refer to
the label affixed on the machine.
When paper jam occurs, the indicator is turned on.
When the priority device indicator (top lamp) blinks, first of all perform the
paper jam operation.
When the button is pressed, paper output in the Booklet Tray is moved to
the collecting position.
Outputs are delivered here.
Side stitch paper is ejected.
Note
When 2,000 sheets or more of paper with large downward curl are
output, a stack of output sheets may fall.
In this case, set the lowest curl correction of Interface Decurler
Module and downward curl correction of Inserter.
Saddle stitch and Single fold paper is ejected.
Open this cover to clear paper jams, replace the Staple Cartridge, remove
jammed staples or dispose of cut pieces for punched holes.
Staple waste goes in here.
4
5
6
Function
49
Finisher D