FujiFilm Apeos C8180 Reference Manual page 31

Loading Paper
Load paper (blank paper or printed paper) to be used as an interleaf or cover.
Inserter Tray is used to load paper used as an interleaf or cover, and print cannot be performed.
Note
• After removing all the paper from the Tray, and then load the paper again together with the paper you want to
add.
• Saddle stitch / Single fold is available only when the same paper size is used as with the body (paper output
from the printer main unit).
• Load paper first before starting the job.
1. Fan the paper well and insert it along the paper
guide all the way until it touches the back.
Important
Do not load paper above the maximum fill line. It may cause paper
jams or machine malfunction.
2. Adjust the paper guide to the size of loaded paper.
Note
If the paper guide width is narrower or wider than the paper, it may
cause paper jams.
Special Media Setting
■Hole Punched Paper
Orientation: Place the holes of paper on the right side when you face the front side of machine.
■Precut Tab
Orientation: Place the tabs of paper on the left side when you face the front side of machine.
31
Inserter