Advertisement
20
WhisperPower Inverter / Battery Charger
Battery
Temperature
AC Input
Generator
Power
Factory
Default
* Circuit Breaker setting representation: SPW (Shore Power Wattage) for AC input power when
Understanding the Display Icons during Unit Operation
Icons
Solid: Unit is running in Battery Charger mode and is charging the battery. Input current limit
set under SPW is applicable when on generator, symbol changes to AUX solid, and current
limit set under GPW is applicable.
Solid: Unit is running in By-Pass mode. (The transfer switch is switched to AC Input Source).
- AC Output power is running from AC Input Source.
- AC Output is available at both the AC Output socket and the AC Output Hardwire terminal
if AC Output switch is turned On (indicated by AC Output indicator located on the left side
of the Display and also the Main unit being On).
Note: Press and hold the 'Escape' button on the Display panel for 5 seconds to toggle AC
Output switch On/Off.
Solid: AC Input is available and is in the operating range.
Flashing: AC Input is detected and is under verification before switching to By-Pass mode.
Solid: Unit is running in Battery Mode (The transfer switch is switched to Inverter)
- AC Output power is running from the inverter
- AC Output is available at both the AC Output socket and the AC Output Hardwire terminal
if AC Output switch is turned On (indicated by AC Output indicator located on the left side
of the Display and also the Main unit being On).
Note: Press and hold the 'Escape' button on the Display panel for 5 seconds to toggle AC
Output switch On/Off.
: High > 35 °C
(Default): Normal 15 - 35°C
: Low < 15°C
230 Vac Models: Range: 4,6,8,10,12,13,14,16A (Default 16A)
GPW= Generator Power (AUX in Display)*
16
Select
to reset all settings to default.
no signal on Digital Input.
GPW (Generator Power Wattage) for AUX input, when +12V on
Digital Input
This normally takes about 10 seconds.
Meaning
Advertisement
