Daewoo Lanos 2002 Owner's Manual page 98

Metal Tape Auto-Sensing
This unit has metal tape auto-sensing func-
tion. If a metal tape is inserted, "MTL" indi-
cator appears on the V.F.D.
Dolby B Noise Reduction Button
Press " " button when playing back the
tape which have been recorded using dolby
noise reduction system.
The dolby symbol ( ) will be illuminated
on the V.F.D.
This system improves the signal to noise ratio
of the tape section, resulting in reduced
audible "hiss" during playback.
AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–35
Repeat Button
Press "RPT" button to repeatedly listen to the
current music.
The repeat indicator "RPT" will be illuminated
in the V.F.D., and the current music will be
played repeatedly until this function is can-
celed.
To cancel this function, press this button
again.
Repeat function requires an interval of about
4 seconds between each music sections to
properly work.
CD PLAYER OPERATION
1. Press the power knob to turn the audio
system on
2. Insert a CD into the CD slot with its label
side up.
The player will begin playing the first
track.
3. If a CD is already inserted in the CD slot,
press the CD button.
The player will play the last track you lis-
tened to.
4. To eject the CD, press the CD eject but-
ton.
If the ejected disc is not taken out of the
CD player within 10 seconds, the CD will
automatically load again.
After the CD is ejected, the audio sys-
tem will change to the last mode (radio
or tape, CDC)