Daewoo Lanos 2002 Owner's Manual page 76

Preset Scan :
To hear the preset station stored on the pre-
set buttons, press the preset scan button
(4) for less than 2 seconds.
In FM band(FM1 or FM2), all of the preset
stations stored on the preset buttons 1
through 6 in the FM1 or FM2 band will be
tuned in for about 5 seconds each in turn.
In AM or LW* band, all of the preset stations
stored on the preset buttons 1 through 6 in
the AM or LW* band will be tuned in for
about 5 seconds each in turn.
During operating this function, the relevant
frequency and preset button number will be
flashed on the L.C.D.
After scanning all of the preset stations,
this function is automatically cancelled and
the station you heard before operating this
function is tuned in.
When desired station is tuned in, press this
button again or the corresponding preset
button to stop the scan function.
AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–13
How to Preset the Station
6 stations on each band (FM1, FM2, AM and
LW*) can be stored into the 6 preset buttons.
Auto Memory :
1. Select the desired band using the band
selection button (10).
2. Press the auto memory button (4) for
more than 2 seconds.
3. Then, the strongest available stations
are automatically stored on the preset
buttons 1 though 6 in sequence.
If you operate this function when the
preset button number is displayed on the
L.C.D., the stations are stored on the pre-
set buttons from that button number to
6.
4. After storing, all of the preset stations
are scanned in sequence for 5 seconds
each. And the station you heard before
operating the auto memory function is
automatically tuned in.
Manual Memory :
1. Select the desired band using the band
selection button (10).
2. Tune in the desired station using tuning
up/down button (5).
3. Press one of 6 preset buttons for more
than 2 seconds.
The preset button number will be dis-
played on the L.C.D., then the station will
be stored in the memory.
4. By the same method, you can store the
desired stations into the 6 preset but-
tons.