Daewoo Lanos 2002 Owner's Manual page 83

5–20 AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER)
Bass Control:
Bass control is used to adjust the bass (low
frequency) sound quality.
1. Select the bass control mode using the
sound mode selector button.
2. When the "BAS" indicator appears on the
VFD, rotate volume control knob clock-
wise to increase the bass (low fre-
quency) and counterclockwise to de-
crease it.
The bass level will appear as a numeric
signal on the VFD.
"0" indicates the original sound level.
The highest bass level is "+5" and the
lowest "-5".
3. After adjusting, the display will return to
full audio system information in 5 sec-
onds.
Treble Control:
Treble control is used to adjust the treble
(high frequency) sound quality.
1. Select the treble control mode using the
audio mode selector knob.
2. When the "TRE" indicator appears on the
VFD, rotate volume control knob clock-
wise to increase the treble (high fre-
quency) and counterclockwise to de-
crease it.
The treble level will appear as a numeric
signal on the VFD.
"0" indicates the original sound level.
The highest treble level is "+5" and the
lowest "-5".
3. After adjusting, the display will return to
full audio system information in 5 sec-
onds.
Balance Control:
Balance control is used to adjust the volume
of the left and right speakers.
1. Select the balance control mode using
the sound mode selector button.
2. When "BAL" indicator appears on the
VFD, rotate volume control knob clock-
wise to decrease the volume of left
speakers.
Then, the balance level signal will
change from "R1" up to "R15".
3. To decrease the volume of the right
speakers, rotate volume control knob
counterclockwise.
The balance level signal will change
from "L1" up to "L15".
4. When the signal "0" appears on the VFD,
the equivalent volume of left and right
speakers is heard.
5. After adjusting, the display will return to
full audio system information in 5 sec-
onds.