Daewoo Lanos 2002 Owner's Manual page 85

5–22 AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER)
Preset Scan:
To hear the preset station stored on each
preset button, press the preset scan button.
In FM band (FM1 or FM2), all stations stored
on the preset buttons will be tuned in for
about 5 seconds in sequence.
In AM or LW* band, all of the stations stored
on the preset buttons will be tuned in.
While this mode the frequency and preset
button number will be flashed on the VFD.
When the scanning function is complete, the
system returns to the station tuned prior to
scanning.
When the desired station is tuned in, press
this button again or the corresponding pre-
set button to stop the scan function.
Scan:
To hear each station on the current
waveband in turn for about 5 seconds.
To Preset a Station
6 stations on each band (FM1, FM2, AM and
LW*) can be stored using the 6 preset but-
tons.
Auto Store:
1. Select the desired band using the AM/
FM selection button.
2. Press the auto store button for more
than 2 seconds.
3. The strongest available stations are au-
tomatically stored on preset buttons 1
though 6.
4. After storing, the system returns to the
frequency selected prior to initiating this
function.
Manual Memory:
1. Select the desired band using the band
selection button.
2. Tune in the desired station using tuning
up/down button.
3. Press one of 6 preset buttons for more
than 2 seconds.
The preset button number will be dis-
played on the VFD, and the selected
station will be stored in memory.