Daewoo Lanos 2002 Owner's Manual page 88

ANTI-THEFT SYSTEM
An identification card with the radio secu-
rity code is provided with your new
Daewoo. Keep this information in a safe
place, not in your vehicle.
The audio security system activates imme-
diately whenever the system is discon-
nected from the battery.
If the audio security system is activated, you
must enter the four-digit security code, us-
ing the following procedure.
AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–25
Entering Security Code
1. Turn the ignition key to "ACC" or "ON"
and press power/volume control knob to
activate the audio system. "AF" or
"COdE" will flash on the VFD. If "AF" is
displayed, go to step 2.
If "COdE" is displayed go to step 4.
2. Enter Area Frequency (AF) code into the
unit using the preset buttons.
For example; if your AF code is "2"
press the preset button No. 2.
3. "COdE" will then flash on the VFD.
4. Enter your security code into the unit
using the preset buttons.
For example; if your "security code" is
"1234".
• Press preset button 1.
"COdE" will be replaced with "1---"
on the VFD.
• Press preset button 2 and "12--" will
be displayed.
• Continue to enter the remaining dig-
its of your security code as above.
• When the complete four-digit secu-
rity code is entered, the complete
security code will flash three times.
Your audio system will then be fully
functional and the radio will begin to
operate.
If you fail to enter the security code correctly,
"Err" will be displayed for a few seconds.
"COdE" will then be displayed again. Repeat
the procedure above for entering the secu-
rity code.
NOTE
• If you fail to enter the AF code, an
incorrect frequency level may be
chosen and radio reception may be
affected.
• If this were to occur, please reset
the audio system by removing and
re-inserting the "Audio (Batt.)"
fuse from the interior fuse box.
• Repeat the Entering Security Code
procedure above.