Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Agora Models Manuals
  4. Motorized Toy Car
  5. JAGUAR E-TYPE
  6. Build instructions

Agora Models Jaguar E-Type Build Instructions

Pack 05
Hide thumbs Also See for Jaguar E-Type:

Advertisement

Quick Links

Download this manual
Pack 05
B U I L D
I N S T R U C T I O N S
STAGE 32: STEERING SYSTEM COMPONENTS
STAGE 36: BULKHEAD FIT TINGS
STAGE 33: COOLING SYSTEM COMPONENTS
STAGE 37: ENGINE BAY FIT TINGS
STAGE 34: THE FRONT BULKHEAD
STAGE 38: RIGHT FRONT WHEEL
STAGE 35: BULKHEAD FITTINGS
STAGE 39: RIGHT FRONT WHEEL
AND PIPEWORK
STAGE 40: RIGHT FRONT WHEEL

Advertisement

loading
Need help?

Need help?

Do you have a question about the Jaguar E-Type and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Agora Models Jaguar E-Type

Summary of Contents for Agora Models Jaguar E-Type

  • Page 1 Pack 05 B U I L D I N S T R U C T I O N S STAGE 32: STEERING SYSTEM COMPONENTS STAGE 36: BULKHEAD FIT TINGS STAGE 33: COOLING SYSTEM COMPONENTS STAGE 37: ENGINE BAY FIT TINGS STAGE 34: THE FRONT BULKHEAD STAGE 38: RIGHT FRONT WHEEL STAGE 35: BULKHEAD FITTINGS...
  • Page 2 WARNING: Some parts are assembled using magnets. These magnets can cause serious injury if they are swallowed. Keep away from children. If you suspect a magnet has been swallowed, seek medical help straight away. AGORAMODELS JAGUAR E-TYPE...
  • Page 3 Rack mountings x2 Steering column assembly Anti roll-bar links x2 Steering rack assembly Radiator hose Anti roll-bar mountings x2 Steering rack mounting Water hose Anti-roll bar AG08 x5 AG06 x3 AM16 x3 AG04 x3 AM17 x3 AM01 x5 AGORAMODELS JAGUAR E-TYPE...
  • Page 4 AG08 Repeat the process to fit the second link on the opposite end. Position the anti-roll bar on the front of the subframe, within the triangles formed by the diagonal stays at the front of the subframe. AGORAMODELS JAGUAR E-TYPE...
  • Page 5 AG08 AG08 Secure the link from the front using an AG08 screw. Fit the link on the other end of the anti-roll bar in the same way, securing it with another AG08 screw. AGORAMODELS JAGUAR E-TYPE...
  • Page 6 Repeat the process on the opposite end of the anti-roll bar, securing Take the steering rack mounting and align the pins on the underside the second mounting in place with another AM17 screw. with the matching holes in the subframe. AGORAMODELS JAGUAR E-TYPE...
  • Page 7 Secure the right-hand lower brace to the steering rack mounting subframe with the screwhole in the end aligned with the second using an AG04 screw. Be careful not to over tighten this screw. screwhole on the steering rack mounting. AGORAMODELS JAGUAR E-TYPE...
  • Page 8 Fit the water hose by pushing one end over the pin on the water This is how the water hose should look once fitted. pump, and tuck the other end behind the plug leads. AGORAMODELS JAGUAR E-TYPE...
  • Page 9 (arrow No 2). Note: when the wheels are pointing straight ahead, the flat side of the ‘D’ on the end of the steering column assembly (opposite the gear) should be level and facing upwards (inset). AGORAMODELS JAGUAR E-TYPE...
  • Page 10 2 x AM01 2 x AM01 Secure the mounting in place using 2 x AM01 screws. Repeat steps 26 & 27 to fit the other mounting to the right-hand side. AGORAMODELS JAGUAR E-TYPE...
  • Page 11 (arrow). Take the oil filter supplied with stage 26 and push it carefully onto the This is how the oil filter should look when correctly fitted. face of the oil pump, as shown. AGORAMODELS JAGUAR E-TYPE...
  • Page 12 Locate the end of the hose leading from the filler cap on the ... and push it into the tiny hole in the engine block (circled). expansion tank... AGORAMODELS JAGUAR E-TYPE...
  • Page 13 Note: the sump is a push-fit attachment so that it can easily be removed to access the batteries. AGORAMODELS JAGUAR E-TYPE...
  • Page 14 Stage 32: Steering System Components S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 15 S T A G E 3 3 P A R T S L I S T Name Radiator (front section) Radiator (back section) Cowl Hose Screws type AG04 x5 Screws type AG06 x3 Radiator (front section) Cowl Radiator (back section) Hose AG06 x3 AG04 x5 AGORAMODELS JAGUAR E-TYPE...
  • Page 16 (arrows). Secure the holes on the radiator/cowl assembly (circled). There is only one way to cowl to the radiator with 2 x AG04 screws. fit these parts. If they don’t fit, rotate the radiator 180° and try again. AGORAMODELS JAGUAR E-TYPE...
  • Page 17 The hose should face this direction. Align the two lugs on the bottom of the radiator (see step 3) with the two holes in the bottom bar of the front subframe (circled). AGORAMODELS JAGUAR E-TYPE...
  • Page 18 Fit the bottom hose from the water pump into the hole in the back of Fit the top hose installed on the radiator into the side of the expansion the radiator (arrow). tank (arrow). AG06 x2 Secure the radiator in place from the underside using 2 x AG06 screws. AGORAMODELS JAGUAR E-TYPE...
  • Page 19 Stage 33: Cooling System Components S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 20 35 to start adding components to it. S T A G E 3 4 P A R T S L I S T Name Front bulkhead Front bulkhead AGORAMODELS JAGUAR E-TYPE...
  • Page 21 Brake servo unit Clip Screws type AG02 x2 Screws type AG03 x4 Fuel filter Brake vacuum hoses Reservac tank (half) Fluid reservoirs Reservac tank (half) Hydraulic and fuel pipes Brake servo unit AG03 x4 Clip AG02 x2 AGORAMODELS JAGUAR E-TYPE...
  • Page 22 Check that the middle section of the clip fits on the fuel filter as shown curved ends of the clip into the holes. (inset arrow). If necessary, secure the clip with a tiny drop of superglue. Push the pin on the fuel filter into the keyhole shaped mounting on the bulkhead. AGORAMODELS JAGUAR E-TYPE...
  • Page 23 Secure the filter from the reverse side with an AG03 screw. Align the two halves of the reservac tank, matching up the locating pins and holes. Press firmly together. Align the two pins on the reservac tank with the corresponding holes on the bulkhead. AGORAMODELS JAGUAR E-TYPE...
  • Page 24 Stage 35: Bulkhead Fittings and Pipework AG03 Press firmly into position. Secure from the reverse side with an AG03 screw. Align the fluid reservoirs with the mounting holes on the bulkhead. Press firmly into position. AGORAMODELS JAGUAR E-TYPE...
  • Page 25 Finally, fit the end of the white pipe onto the pin projecting from the fuel filter. Grip the single end of the brake vacuum hoses with tweezers and plug it into the hole in the Reservac. AGORAMODELS JAGUAR E-TYPE...
  • Page 26 Secure the brake servo unit in place from the reverse side with an Grip one of the ends of the brake vacuum hoses and plug it onto the AG02 screw. pin on the brake servo unit (see picture 21). AGORAMODELS JAGUAR E-TYPE...
  • Page 27 Stage 35: Bulkhead Fittings and Pipework A brake vacuum hose has been connected to the brake servo, leaving one brake vacuum hose to be connected at a future stage. S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 28 Screws type AG02 x3 Screws type AG03 x3 Heater case Heater motor Reservoir bracket Voltage control unit Throttle linkage Heater water control valve Washer reservoir Engine stabiliser mounting Washer tube Windscreen wiper motor Washer cap AG03 x3 AG02 x3 AGORAMODELS JAGUAR E-TYPE...
  • Page 29 Press firmly into position. bulkhead (circled). AG03 Secure the heater case in place from the reverse side with an AG03 Line up the heater motor with the heater case, checking that the flat screw. edge faces the bulkhead. AGORAMODELS JAGUAR E-TYPE...
  • Page 30 Push the heater motor in place and fit an AG03 screw through the centre of the motor to secure it in place. Align the keyhole-shaped lug on the wiper motor with the matching hole in the rectangular recess on the bulkhead. AGORAMODELS JAGUAR E-TYPE...
  • Page 31 Line up the tiny pins on the throttle linkage with the corresponding screw. holes on the bulkhead (circled). Press the linkage into place. Align the two pins on the engine stabiliser mounting with the two holes on the bulkhead (circled). AGORAMODELS JAGUAR E-TYPE...
  • Page 32 Press the mounting into place. Secure from the reverse side with an AG03 screw. To assemble the washer reservoir, align the keyhole-shaped lug on the Press the cap into place. cap with the top of the reservoir. AGORAMODELS JAGUAR E-TYPE...
  • Page 33 Secure the cap from the underside using an AG03 screw. Take the reservoir bracket and line it up with the keyhole-shaped hole on the bulkhead. AG03 Push into position..and secure in place using an AG03 screw. AGORAMODELS JAGUAR E-TYPE...
  • Page 34 Sit the reservoir in the bracket with the tiny hole in the cap facing Line up the heater water control valve next to the reservoir. outwards (inset). AG02 Press firmly into position. Secure from the reverse side using an AG02 screw. AGORAMODELS JAGUAR E-TYPE...
  • Page 35 Push the lug into the bulkhead as shown. AG02 Secure from the reverse side with AG02 screw. Fit one end of the washer tube into washer reservoir cap and the other end into the bulkhead as shown (see step 29). AGORAMODELS JAGUAR E-TYPE...
  • Page 36 Stage 36: Bulkhead Fittings The washer tube is fitted into place. S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 37 Gearbox mountings x2 Battery leads Screws type AG02 x2 Screws type AM18 x5 Screws type AM15 x9 Screws type AG03 x8 Right-hand mudshield Left-hand mudshield Gearbox mountings x2 Battery Battery leads AG03 x8 AM15 x9 AM18 x5 AG02 x2 AGORAMODELS JAGUAR E-TYPE...
  • Page 38 Note there are eight fixing points (circles and arrows). Bring the two the air filter. See step 16 for more guidance. assemblies together, matching up the fixing points. AGORAMODELS JAGUAR E-TYPE...
  • Page 39 When you have checked that everything is in the correct place, fix the Next, you’ll install the battery. Start by plugging the battery leads into subframe to the bulkhead using 8 x AM15 screws. the battery by positioning them as shown. AGORAMODELS JAGUAR E-TYPE...
  • Page 40 Push the two battery connections firmly into the holes in the top of Align the battery with the left-hand mudshield as shown. the battery. AG03 Push the lug on the bottom of the battery into the hole in the Fix the battery in place using an AG03 screw. mudshield. AGORAMODELS JAGUAR E-TYPE...
  • Page 41 (arrow). be fixed in place. Using tweezers, grip the end of the bunch behind the pin (arrow) and push the pin into the hole in the subframe (circled). AGORAMODELS JAGUAR E-TYPE...
  • Page 42 All the pipes can be secured with a tiny drop of superglue if required. The brake vacuum hoses have now be fitted. Take the right-hand mudshield and position it in front of the air filter. AGORAMODELS JAGUAR E-TYPE...
  • Page 43 ... and secure in place from the underside using an AG03 screw. AG02 Then secure the mudshield to the bulkhead with an AG02 screw. Take one of the gearbox mountings and fit it into the recess at the back of the gearbox. AGORAMODELS JAGUAR E-TYPE...
  • Page 44 Screw the mounting to the bulkhead using 2 x AM18 screws. AG03 x2 AG03 x2 Using 2 x AG03 screws this time, fix the mounting to the gearbox on ... and repeat on the other side. one side... AGORAMODELS JAGUAR E-TYPE...
  • Page 45 Stage 37: Engine Bay Fittings S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 46 39 to start lacing the spokes. S T A G E 3 8 P A R T S L I S T Name Wheel rim (outer) Inner spokes x24 Wheel rim (outer) Inner spokes x24 AGORAMODELS JAGUAR E-TYPE...
  • Page 47 S T A G E 3 9 P A R T S L I S T Name Wheel centre Spoke retainer ring Inner spokes x24 Screws TYPE AG02 x5 Spoke retainer ring Wheel centre Inner spokes x24 AG02 x5 AGORAMODELS JAGUAR E-TYPE...
  • Page 48 Take the wheel rim from stage 38 and align the hole on the outer Fit the wheel rim onto the jig, pressing firmly to lock the rim into edge with the pin on the jig (arrows). position. AGORAMODELS JAGUAR E-TYPE...
  • Page 49 Check that they are hooked around the wide teeth. If they are not hooked around wide teeth, the spokes will not fit and the wheel parts will not fit together at the end of the build. AGORAMODELS JAGUAR E-TYPE...
  • Page 50 The spoke tips will now face in the opposite direction to those fitted the uppermost row. on the bottom row. Make sure that they are hooked around a ‘wide’ tooth otherwise they cannot be secured in place in a later step. AGORAMODELS JAGUAR E-TYPE...
  • Page 51 Carefully align the spoke retainer ring over the wheel. The projecting screw holes on the ring will fit onto the raised screw holes as indicated. Lower the ring into position. Note: the projecting pin on the spoke retina locates in the notching wheel rim. AGORAMODELS JAGUAR E-TYPE...
  • Page 52 Gently prise the wheel off the jig. Do not pull the wheel – try to in place. carefully release it using a screwdriver or similar tool that will act as a lever. Keep the jig as you’ll need it to assemble the remaining wheels. AGORAMODELS JAGUAR E-TYPE...
  • Page 53 Stage 39: Right Front Wheel S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...
  • Page 54 S T A G E 4 0 P A R T S L I S T Name Spacer ring Wheel rim Spokes type B x12 Spokes type A x12 Screws TYPE AG03 x5 Wheel rim Spacer ring Spokes type B x12 AG03 x5 Spokes type A x12 AGORAMODELS JAGUAR E-TYPE...
  • Page 55 Note that there are two rows for threading the spokes – an inner row and an outer row. You’re going to start on the inner row. opening slightly clockwise (coloured red above) so that the tip pokes through to the opposite side. AGORAMODELS JAGUAR E-TYPE...
  • Page 56 Continue to thread the type A spokes all the way around the inner row, All 12 x type A spokes have been fitted to the inner row. pushing the tip through alternate diamond-shaped openings as indicated. AGORAMODELS JAGUAR E-TYPE...
  • Page 57 It should lead slightly anti-clockwise. Check that it will hook a wide tooth, but do not hook it just yet, leave the spokes loose. AGORAMODELS JAGUAR E-TYPE...
  • Page 58 A and B around the teeth. Use your thumb in a stroking motion, or tweezers here. The fit of the spokes can be lightly adjusted by gently pressing and/or twisting the wheel centre with your thumb. AGORAMODELS JAGUAR E-TYPE...
  • Page 59 Fix the inner wheel rim in place with 4 x AG03 screws. spoke retainer ring and the inner rim has closed up. If not, remove the inner rim and recheck the position of the spokes, Step 17. AGORAMODELS JAGUAR E-TYPE...
  • Page 60 Stage 40: Right Front Wheel S T A G E C O M P L E T E AGORAMODELS JAGUAR E-TYPE...