15
Grip the white tab of the protective sheet a. Slightly lift the drum
cartridge with one hand and slowly pull the tab of the protective sheet
horizontally with the other hand to break the white connectors b and
remove the sheet c.
• Be sure to pull the tab of the protective sheet straight out. If you pull it out at an
angle, the tab may tear off halfway and the protective sheet may not be removed
completely.
16
Turn the drum cartridge around before installing it. Hold the drum
cartridge by its handle a, and slide it into the machine as far as it goes b.
Install the plate on the drum cartridge cover c.
• There are some areas inside the machine which are subject to high voltages and
high temperatures. Take adequate precaution when performing internal
inspections, to avoid burns or electrical shock.
17
Close the drum cartridge cover.
18
Slide the platen unit to its original position.
5-12
2
1
Tab
3
Tab
Plate
1
1
3
3
2
2