Alpha ESS SMILE-B3-PLUS Owner's Manual page 33

Hide thumbs Also See for SMILE-B3-PLUS:
Table of Contents

Advertisement

Section 5. Fire-fighting measures
Suitable extinguishing media:
In case of fire suitable extinguishing media: carbon dioxide or dry chemical. Use Novec 1230, FM-200, or dioxide extinguisher.
ABC extinguishers are not effective when the battery pack is on fire.
Special hazards arising from chemical:
Contents react with water. May explode if exposed to high temperatures due to pressure build up in battery casing. Lithium may
burn in a fire situation and may be ejected from the battery. Damaged cells may evolve toxic and flammable vapours.
Specific protective equipment and precautions for firefighters:
Evacuate area and contact emergency services. Toxic gases may be evolved in a fire situation. Remain upwind and notify those
downwind of hazard. Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) and protective gear in
compliance with the Directive on Personal Protective Equipment 89/686/EEC when combating fire. Use water fog to cool intact
containers and nearby storage areas.
Hazchem code:
4 – Dry Agent (water MUST NOT be allowed to come into contact with substance).
W – Risk of violent reaction or explosion. Wear liquid-tight chemical protective clothing and breathing apparatus.
Contain spill and run-off.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Wear Personal Protective Equipment (PPE) as detailed in SECTION 8 of this SDS.
Environmental precautions:
See SECTION 12 for additional Ecological Information.
Methods and materials for containment and cleaning up:
If spilt, collect and reuse where possible. If battery is broken or damaged, absorb liquid with sand or similar. Contain spillage, then
collect and place in suitable containers for disposal. CAUTION: Avoid exposure to contents. For waste disposal, see SECTION 13
of the SDS.
Section 7. Handling and storage
Precautions for safe handling:
Before use carefully read the product manuals Use of Safe Work Practices are recommended to avoid eye or skin contact and
inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in
contaminated areas.
Conditions for safe storage, including any incompatibilities:
Store tightly sealed in a cool, dry, well ventilated area, removed from water, incompatible substances, heat or ignition sources
and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Check
regularly for leaks or spills. Store within the recommended limit of -20°C to 45°C. Do not expose to high temperature (55°C). Since
short circuit can cause burn hazard or safety vent to open, do not store with metal jewellery, metal covered tables, or metal belt.
Section 8. Exposure controls / Personal protection
Exposure control measures:
This product presents no health hazards to the user when used
according to label directions for its intended purposes.
Biological monitoring:
Ingredient
Determinant
Fluoride in urine
Polyvinylidene
Fluoride
Fluoride in urine
Reference: ACGIH Biological Exposure Indices
Control banding:
Control banding is not used.
Engineering controls:
Use local exhaust ventilation or other engineering controls to
control sources of dust, mist, fume and vapour.
Personal protective equipment (PPE):
Eye Protection: Not necessary under normal use. Wear safety
Sampling Time
BEI
goggles if handling a ruptured or leaking battery cell.
Skin Protection: Not necessary under normal use for hands
Prior to shift
2 mg/L
and body. Wear PVC or rubber gloves if handling a ruptured or
leaking battery cell.
Respiratory Protection: Not necessary under normal use. In
End of shift
3 mg/L
case of battery or cell rupture, use a self-contained full face
respiratory mask.
www.alpha-ess.com
33
SAFETY DATA SHEETS
Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smile-bat-5p

Table of Contents