Connecting The Solar Panels - EcoFlow RIVER Max User Manual

Connecting the Solar Panels

The RIVER Max can support a 10-25V DC input. When the input exceeds 25V, the RIVER Max
overvoltage protection will be activated. Overvoltage may damage the product. Users should
read these instructions carefully because any incorrect use of solar panels that leads to product
damage will void the EcoFlow warranty.
How to Recharge the RIVER Max Using Solar Panels
For full step-by-step instructions about how to connect RIVER Max with solar panels, please refer to the Solar
Panel User Guide.
1. Recommend Charging Method
Users can connect a solar panel as shown in Example 1. DO NOT attempt to connect more than one solar panel
in series.
1. Connect the solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the RIVER
Max's XT60 input port to charge the RIVER Max. Users can connect up to 2 sets of solar panels in parallel to the
MC4 port as shown in Example 2.
2. If you want to connect 2 sets of solar panels, connect them with our solar MC4 parallel connection cable and
connect the solar MC4 parallel connection cable to the MC4 to XT60 Solar Charging Cable. Then Connect the
XT60 connector to the RIVER Max's XT60 input port to charge the device. The parallel connection cable is an
optional accessory that is sold separately.
Note: The EcoFlow Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased
separately. The charging methods below are with respect to using the EcoFlow 110W Solar Panel.
Charging Method 1
RIVER Max Charging Port
XT60 Connector
*Solar charging cable (MC4-XT60 adapter cable) is supplied separately.
8
MC4 Connector
RIVER Max
SOLAR PANEL-21.6V