Advertisement
Control, monitor and customize your EcoFlow RIVER 2 from afar with the EcoFlow App.
Refer to "Troubleshooting" for details.
Press the main power button once to turn on the product. The LCD screen lights up and the main power indicator flashes white. Press and hold the main power button (for about 3 seconds) to turn off the product, and the LCD screen.
The USB-A and USB-C output ports are automatically turned on once the product is turned on. Press the "DC output switch" or "AC output switch" once to turn on their corresponding DC/AC output sockets; press again to turn them off.
When using the AC output socket, make sure that the sum power of all loaded devices is less than the rated power.
You can recharge the product through the car power outlet. The product supports 12V/24V car chargers and a maximum charging current of 8A.
To avoid failure to start due to insufficient car battery, use the car charger after the vehicle is started. In addition, please make sure that the car charger cable is securely connected to the cigarette lighter.
EcoFlow takes no responsibilities for any loss or damage caused by failure to follow instructions.
The USB-C charging cable (Type-C plug) and adapter are supplied separately.
The product supports X-Boost. It can power devices rated at up to 600W without incurring operation failure due to overload protection. Observe the following tips when using the X-Boost feature:
The product supports emergency power supply (EPS). When you connect the grid power to the AC input port of the product through an AC cable, you can power electrical devices through the AC output port (AC power will come from the grid instead of the power station in this situation). In case of a sudden blackout, the product can automatically switch to the battery-powered supply mode within 30ms.
As a basic UPS feature, the EPS does not support 0ms switching. Please do not connect the product to any device that requires 0ms UPS (such as data servers and workstations). Please test and confirm the compatibility before using the product. We recommend that you power only one device (with maximum power <600W) at a time and avoid using multiple appliances at the same time to avoid triggering overload protection. EcoFlow takes no responsibilities for any device failure or data loss caused by failure to follow instructions.
Indicator | Problem | Solution |
Flashing | Battery discharge low temperature | Normal operation will resume automatically when the battery warms up. |
Flashing | Battery discharge high temperature | Normal operation will resume automatically after the battery cools down. |
Flashing | Battery charging low temperature | Normal operation will resume automatically after the battery temperature is restored to above 3°C. |
Flashing | Battery charging high temperature | Normal operation will resume automatically after the battery cools down. |
Flashing | AC output low temperature | Normal operation will resume automatically when the product warms up. |
Flashing | AC output high temperature | Ensure that the air inlet and outlet of the product are unobstructed. Normal operation will resume automatically after the temperature decreases. |
Flashing | USB-C or car charging output overload | Disconnect overloading devices and restart the product to resume normal operation. |
Flashing | AC output overload | Disconnect overloading devices and restart the product to resume normal operation. The sum power of loaded electrical appliances must not exceed the rated power (for the power limit of electrical appliances in X-Boost mode, please refer to the X-Boost feature introduction). |
Flashing | Charging overload | Remove the charging cable and normal operation will resume automatically after restart. |
Flashing | Fan blocked | Check whether the fan is blocked by foreign objects. |
Flashing | Communication failure between main control board and AC | Normal operation will resume automatically after restart. |
If a warning appears during the use of the product and the warning icon persists after restart, please stop using the product immediately (do not attempt to charge or discharge it). For problems not covered in the preceding table, please consult EcoFlow customer service.
High-quality LFP battery.
The rated power of the product is 300W and the peak power is 600W. With the X-Boost feature, the product's AC output sockets can power devices rated at 600W or below. We recommend that you confirm the power of devices before use, and ensure that the sum power of all loaded devices is less than the rated power.
How do I know how long the product can charge my devices?
The charging time is shown on the product's LCD screen, which can be used to estimate the charging time of most appliances with stable power usage.
During charging, the remaining charging time is shown on the LCD screen. Meanwhile, the circle indicator around the remaining battery percentage rotates and the input power is shown.
No.
We recommend that you do not switch the frequency in most cases. If you need to switch the AC frequency due to special circumstances, please turn on the AC power, and then press and hold the AC output switch for 10 seconds or use the app to switch frequency.
General Information | |
Weight | Approximately 3.5kg (7.8lbs) |
Dimensions | 245 x 215 x 145mm (9.6 x 8.5 x 5.7inches) |
Capacity | 256Wh (20Ah 12.8V ) |
Wi-Fi (2.4G) | Frequency range: 20M: 2412-2462MHz/40M: 2422-2452MHz Maximum output power: 0.071W |
Bluetooth | Frequency range: 2402-2480MHz Maximum output power: 0.005W |
Model | EFR600 |
Input Specifications | |
AC Input | 100V-120V~50Hz/60Hz, 8A Max |
Car Charging Input | 12V/24V 8A, 100W Max |
Solar Charging Input | 11-30V 8A, 110W Max |
USB-C Input | 5/9/12/15/20V 3A, 60W Max |
Output Specifications | |
USB-C Output | 5/9/12/15/20V 3A, 60W Max |
USB-A Output | 5V 2.4A 12W Max per port |
DC Output | 12.6V 8A, 100W Max |
AC Output | Pure sine wave, 300W total (600W peak), 120V~50Hz/60Hz* |
Battery Specifications | |
Cell Material | LFP battery |
Cycle Life | 80%+ capacity after 3000 cycles |
Operating Temperatures | |
Optimal Ambient Temperature for Operation | 20°C~30°C(68°F to 86°F) |
Ambient Temperature for Discharging | -10°C~45°C(14°F to 113°F) |
Ambient Temperature for Charging | 0°C~45°C(32°F to 113°F) |
Ambient Temperature for Storage | -10°C~45°C (optimal: 20°C~30°C) 14°F to 113°F (optimal: 68°F to 86°F) |
*Do not switch the AC output frequency at will, as it may cause some electrical appliances to stop working.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the RIVER 2 that isn't answered in the manual? Leave your question here.