EcoFlow RIVER Max User Manual page 12

6
High-Temperature
Discharging Protection
Low-Temperature
Recharging Protection
Low-Temperature
Discharging Protection
Overload
Recharging-protection
Overload Discharging
Protection
Communication Failure
between the Main Board
and BMS
Light stays on
Communication Failure
between the Main Board
and AC
Inverter Output Overload
Inverter High-Temperature
Protection
Battery Exclamation and High-T emperature icons flash together.
Turn OFF System Power and let RIVER Max cool down
before turning the System Power back on.
Recharging Time, Battery Exclamation, and Low-Tem-
perature icons flash together.
Disconnect Charging Cables and all electrical appliances
and place RIVER Max in warm er place before plugging
Charging Cable back in and recharging.
Battery Exclamation and Low-T emperature icons flash together.
Turn OFF System Power and place RIVER Max in warm-
er place before turning the System Power back on.
Recharging Time, Battery Exclamation, and OVER-
LOAD icons flash together.
Unplug the charging cables, restart the RIVER Max,
and plug back the charging cables back in.
Battery Exclamation and OVERLOAD icons flash together.
Disconnect all appliances, restart the RIVER Max, and
add each appliance back in in turn. Please note that
electrical appliances must be operated within rated
power.
Exclamation icon flashes.
Restart the RIVER Max.
Exclamation icon flashes.
Restart RIVER Max.
AC icon flashes.
Restart the RIVER Max.
AC and OVERLOAD icons flash together.
Turn off RIVER Max. Unplug all appliances. Wait 10
seconds, turn System Power ON then AC Power ON
and plug each appliance back in in turn. If the icons
keep flashing, do not charge or discharge the unit.
Please note that electrical appliances must be oper-
ated within rated power. (For more information about
X-Boost function, go to P10.
AC and High-Temperature icons flash together.
Turn off RIVER Max and let it cool down. Then turn
System Power On and AC Power On.