Fuji Xerox ApeosPort Print C5570 Reference Manual page 271


Zoom Mode: Object Area, Zoom: OFF
Printed at actual size.
Therefore, the section outside the output size is not printed.
Determining the Document Size
1.
The largest value of the following items is added as margin for an object area determined by [Area Determine
Mode].

Size of specified text within page

Size of the default text

1/2 of the specified pen width
2.
[Object area determined by Area Determine Mode] + [Added margin] - [Configured paper margin] becomes the
object area to be drawn.
3.
When [Zoom Mode] is [Output Size], the document size is determined from the area of the object to be drawn.
When [Zoom Mode] is [Object Area], the document size is determined based on the origin location of the object
area to be drawn.

Example of determination method
When Auto Layout = ON, Document Size = Auto, Zoom Mode = Output Size, Area Determine Mode = IP, Paper
Margin = 10 mm, and Pen Width = 0.1 mm
IN;
IP-8399,-5938,8399,5938;
IW-8399,-5938,8399,5938;
PU;
SP1;
:
:
Output Size
Printable area
Object area determined by [Area Determine Mode]
Drawn object area (= print area)
Output Size
Printable area
Object area determined by [Area Determine Mode]
Drawn object area (= print area)
271
11.5 Emulation