Setting Up The Appliance; Turning The Appliance On; Turning The Appliance Off; Menu Settings - DeLonghi Eletta ECAM45.760.W Manual

Table of Contents

Advertisement

If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
electrician.

5.4 Setting up the appliance

Please note!
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
You should customise water hardness as soon as possible
following the instructions in section "14. Setting water
hardness".
1. Insert the power cord (C8) connector into the socket at the
back of the appliance (A19) and connect the appliance to
the mains electricity supply (fig. 1). Make sure the main
switch (A20) at the back of the appliance is pressed (fig. 2).
2. Remove the water tank (A16- fig. 3), open the lid (A18- fig.
4), fill to the MAX line with fresh water (fig. 5), replace the
lid and put the tank back in the appliance.
You must first choose the language by moving backwards and
forwards with the < (B4) or > (B8) (fig. 9) button, or waiting
until the languages scroll through on the display (B13) at inter-
vals of about 3 seconds:
3. When "English" appears, press and hold the OK button
(B12-fig. 10) for a few seconds until "English set" appears
on the display.
Follow the instructions indicated on the appliance display:
4. "INSERT WATER SPOUT": Check that the hot water spout
(C6) is inserted on the connection nozzle (A8) and place a
container holding a minimum of 100 ml underneath (fig.
7).
5. "HOT WATER Press OK" is displayed;
6. Press the OK button to confirm (fig. 10). The appliance de-
livers water from the spout then goes off automatically.
The coffee machine is now ready for normal use.
Please note!
When setting up the appliance, you need to make 4-5 cups
of coffee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
When making the first 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a
water softener filter (C4) as described in section "15. Water
softener filter". If your model is not provided with a filter,
you can request one from De'Longhi Customer Services.

6. TURNING THE APPLIANCE ON

Please note!
Before turning the appliance on, make sure the main switch
(A20) is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A7) and is collected in the drip tray (A12) underneath. Avoid
contact with splashes of water.
To turn the appliance on, press the
8). The message "Heating up, Please wait" appears on the
display (B13).
When heating is complete, the message changes to "RINSING".
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coffee appears.

7. TURNING THE APPLIANCE OFF

Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts
(A7). Avoid contact with splashes of water.
To turn the appliance off, press the
8).
The message "Turning off Please wait" appears on the
display (B13), then, if necessary, the appliance performs a
rinse cycle and goes off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
first turn the appliance off by pressing the
release the main switch (A20) at the back of the appliance
(fig. 2).
Important!
Never press the main switch while the appliance is on.

8. MENU SETTINGS

8.1

Rinsing

Use this function to deliver hot water from the coffee spout (A7)
and from the hot water/steam spout (C6), if inserted, to clean
and heat the appliance's internal circuit.
Place a container with a minimum capacity of 100 ml under the
hot water/steam spout (fig. 7).
118
button (B1-fig.
button (B1- fig.
button;

Advertisement

Table of Contents
loading

Table of Contents