Setting Up The Appliance; Turning The Machine On - DeLonghi ECAM35075 Manual

3. SETTING UP THE APPLIANCE

Please note:
• The first time you use the appliance, rinse with hot water
all removable accessories which may come into contact
with water or milk.
• Possible traces of coffee in the grinder are the result of
operating tests performed on the appliance before sale,
proof of the meticulous care and attention we invest in our
products.
• You should customize water hardness as soon as possible
following the instructions in section "15. Setting water
hardness".
1. Plug the machine into the mains socket and press the main
switch (fig. 1). If your fitted in your model, make sure the
main switch (A22) at the back of the appliance is pressed
(fig. 2);
2. "Language": press the selection arrow (B2) until the re-
quired language is displayed between the two dotted
lines, then press
Now follow the instructions indicated on the appliance display
(B1):
3. Remove the water tank (A17), fill to the MAX line with fresh
water (fig. 3A) then put back in the appliance (fig. 3B).
3A 3A
3B
1
(B3) to confirm.
4. Check that the hot water spout (C6) is inserted on the con-
nection nozzle (A8) (fig. 4) and place a container holding a
minimum of 100 ml underneath (fig. 5);
5. "Water circuit empty, Fill water circuit, Hot water, Confirm?";
6. Press
from the spout. Press the
appliance on again if needed,.
The coffee machine is now ready for normal use.
Please note:
• The first time you use the coffee machine, you need to
make 4-5 cups of coffee or 4-5 cappuccinos before it starts
to give satisfactory results.
• When making the first 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
2
• To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener filter (C4) as described in section "16. Water soft-
ener filter". If your model is not provided with a filter, you
can request one from De'Longhi customer services.

4. TURNING THE MACHINE ON

Please note:
Before turning the appliance on, make sure the main switch on
the back of the appliance is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, hot water comes out of the coffee spouts (A9)
and is collected in the drip tray (A15) underneath. Avoid contact
with splashes of water.
• To turn the appliance on, press the
6). The message "Heating Please wait" appears on the dis-
4
play (B1).
7
5
to confirm. The appliance delivers hot water
button (A7) to turn the
button (A7) (fig.