Product Quality And Environmental Protection - ABB UniGear ZS1 Instruction Manual

8. Product quality and environmental protection

102
The UniGear ZS1 type panels are produced in compliance with the requirements of international
standards for the quality management system and environmental management system. In these
fields, the excellent level is proved by quality certificates according to ISO 9001 and by the EMS
according to ISO 14 001.
End of life of product
The ABB company is committed to complying with the relevant legal and other requirements for
environment protection according to the ISO 14 001 standard.
The duty of company is to facilitate subsequent recycling or disposal at the end of product life.
During disposal of the product, it is always necessary to act in accordance with local legal requirements
in force.
We use the following methods of disposal:
Disposal can either be carried out thermally in an incineration plant or by storing on a waste site.
RAW MATERIAL
Metal material (Fe, Cu, Al, Ag, Zn, W, others)
Thermoplasts
Epoxy resin
Rubber
Oil as dielectric (transformer oil)
SF gas
6
Packing material – wood
Packing material – foil
RECOMMENDED METHOD OF DISPOSAL
Separation and recycling
Recycling or disposal
Separation of metal material and the disposal of rest
Disposal
Draining from equipment and further recycling or disposal
Discharging from equipment and further recycling or disposal
Recycling or disposal
Recycling or disposal