Figure 90:
Junction of the front and rear sheet.
Nr. 6 screws 10x30
Nr. 6
M10 nuts
Nr. 12 M10 washer
Figure 91:
Front connection plates.
Nr. 8 screws 8x30
Nr. 8 M8 washer
Figure 92:
Central connection plates.
Nr. 10 screws 8x30
Nr. 10 M8 washer
56
Once that the two sheets are fixed to the panel, it is possible to fix the two sheets between them (figure
90) using nr.6 screws.
Repeat the above described operations for the adjacent panel.
At this point it is possible to fix the front connection plate between the two gas duct panels (figures 91).
Fix the central connection plate between the two gas duct panels (figures 92).