Introduction; Environmental Protection Program; End Of Life Recycle/Disposal - ABB OVR-15 Instruction, Operation And Maintenance Manual

A. I
NTRODUCTION
This manual contains the information needed to install Low voltage (LV) cabinet of medium voltage
OVR-15, 27 & 38 vacuum recloser and put them into service.
For correct use of the product, please read this manual carefully along with instruction, operation, and
maintenance manual for high voltage unit.
OVR-15, 27 & 38 reclosers are designed for different installation configurations. However, the mounting
structure for this apparatus allows further technical-construction modifications (at the customer's
request) to adapt to special installation requirements. Consequently, the information given below may
sometimes not contain instructions concerning special configurations.
Apart from this manual, it is therefore always necessary to consult the latest technical documentation
(electric circuit and wiring diagrams, assembly and installation drawings, any protection coordination
studies, etc.), especially regarding any variants requested in relation to the standardized configurations.
Only use original spare parts for maintenance operations. For further information, please refer
recommended spare part list mentioned in this manual.
All the installation, putting into service, running and maintenance operations must be carried out by
skilled personnel with in-depth knowledge of the apparatus.
B. E
NVIRONMENTAL PROTECTION PROGRAM
OVR-15, 27 & 38 reclosers LV cabinet recloser is manufactured in accordance with the ISO 14001
Standards (Guidelines for environmental management).
The production processes are carried out in compliance with the Standards for environmental protection
in terms of reduction in energy consumption as well as in raw materials and production of waste
materials. All this is thanks to the medium voltage apparatus manufacturing facility environmental
management system.
C. E
ND OF LIFE RECYCLE
ABB is committed for complying with relevant legal and other statutory requirements for environment
protection according to the ISO 14001 standard. The duty of the end user is to facilitate end of life
recycling & disposal according to the applicable regulations.
During disposal of product, it is necessary to act in according with local legal requirements in force.
Disposal can either be carried out thermally in an incineration plant or by storing on a waste site.
Following are the methods of recycle/disposal:
6 | P a g e
/
DISPOSAL
OVR-15, 27 & 38 LV cabinet Instruction Manual