Apparatus - ABB UniGear ZS1 Instruction Manual

Sliding rollers
Figure 31: Handling by means of rollers
Figure 32: Lifting switchgear packed in a wooden crate
24
4.6.1.3 Handling by means of transpallet or fork lift trucks
• Only use transpallets or fork lift trucks on a level floor.
• Move the switchgear section avoiding any tilting.
To guarantee stability, the switchgear must not be lifted too high. Check the levelness of the forks.

4.6.2 Apparatus

The apparatus can be handled by means of cranes, fork lift trucks or using the truck provided by ABB.
For each piece of apparatus follow the instructions below.
• While handling do not put any stress on the insulating parts and on the apparatus terminals.
• Before handling the apparatus, make sure that the operating mechanism springs are
discharged and that the apparatus is in the open position.
Figure 33: Switchgear handling
Metal sheet