HYOSUNG GV125S Owner's Manual page 2

1. BATTERY INITIAL CHARGING
Initial charging of the battery is required after filling electrolyte to
improve the battery durability.
2. BATTERY INSTALLATION
① Fill the electrolyte to the battery.
② Leave the battery for 30 minutes.
③ Charge the battery by standard charging. This is necessary for
reliability of the battery.
④ Install the battery to the motorcycle.
※
STANDARD CHARGING TIME
Do not use the battery without the battery initial charging.
Otherwise the battery service life may be shortened.
The motorcycle use a battery ignition system.
Do not permit to start or operate the motorcycle without the
battery otherwise the electrical system will be damage.
Always start or ride the motorcycle with the correct battery
installed and connected.
BATTERY INITIAL CHARGING
— 2 —
: 1.0 A for 10 hours