Backup & Restore; Reboot - TP-Link TL-WR940N User Manual

Chapter 5
5. 7. 5.
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
• To backup configuration settings:
Click Backup
of the current settings will be stored in your computer.
• To restore configuration settings:
1. Click
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not power off or reset the router.
5. 7. 6.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
Downloaded from ManualsNet.com
Backup & Restore
System Tools > Backup &
to save a copy of the current settings in your local computer. A ".bin" file
Choose File to locate the backup configuration file stored in your computer, and

Reboot

System Tools > Reboot, and you can restart your router.
search engine
Configure the Router in Access Point Mode
Restore.
90