Firmware Upgrade; Factory Defaults - TP-Link TL-WR940N User Manual

Chapter 5
• Fail Count
value is overrun, the router will restart automatically.
5. 7. 3.
TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to
4. Click
5. 7. 4.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
default values.
•
•
•
•
Downloaded from ManualsNet.com
- Upper limit of the ping packets the router can drop continuously. If this

Firmware Upgrade

and upgrade the firmware to the latest version.
System Tools > Firmware
Browse to locate the downloaded firmware file, and click Upgrade.

Factory Defaults

System Tools > Factory
The default Username: admin
The default Password: admin
The default IP Address: 192.168.0.254
The default Subnet Mask: 255.255.255.0
search engine
Configure the Router in Access Point Mode
Upgrade.
Defaults. Click Restore
Support page of our website
to reset all settings to the
89