TP-Link TL-WR940N User Manual page 97

Chapter 5
• Auto Mail Feature
• Mail Settings
validation information as well as the timetable for Auto Mail Feature.
•
•
•
•
Note:
Only when you select Authentication, do you have to enter the user name and password in the following fields.
•
•
•
•
Click Save
Click Back
Downloaded from ManualsNet.com
- Indicates whether the auto mail feature is enabled or not.
- Set the receiving and sending mailbox address, server address,
From - Your mail box address. The router will connect it to send logs.
To - Recipient's mail address. The destination mailbox which will receive logs.
SMTP Server - Your smtp server. It corresponds with the mailbox filled in the
From field. You can log on the relevant website for help if you are not clear with
the address.
Authentication - Most SMTP Server requires Authentication. It is required by
most mailboxes that need user name and password to log in.
User Name - Your mail account name filled in the From field. The part behind @
is included.
Password - Your mail account password.
Confirm The Password
Enable Auto Mail Feature
the current logs either at a specified time everyday or by intervals, but only one
could be the current effective rule. Enter the desired time or intervals in the
corresponding field.
to apply your settings.
to return to the previous page.
search engine
Configure the Router in Access Point Mode
- Enter the password again to confirm.
- Select it to mail logs automatically. You could mail
92