Wireless; Wireless Settings - TP-Link TL-WR940N User Manual

Chapter 4
4. 5.
4. 5. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the basic settings for the wireless network and click Save.
• Wireless Network Name
TP-Link_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
• Mode
default setting
the router.
Note:
If 11bg mixed mode is selected, the
changed.
• Channel Width
is Auto, which can automatically adjust the channel width for your clients.
• Channel
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Enable Wireless Router Radio
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
• Enable SSID Broadcast
name (SSID).
Downloaded from ManualsNet.com

Wireless

Wireless Settings

Wireless > Wireless Settings.
- Enter a string of up to 32 characters. The default SSID is
- Select the desired mode. It is strongly recommended that you keep the
11bgn mixed, so that all 802.11b/g/n wireless devices can connect to
Channel Width
- Select any channel width from the drop-down list. The default setting
- This field determines which operating frequency will be used. The default
- If enabled, the router will broadcast the wireless network
search engine
Configure the Router in Standard Wireless Router
field will turn grey and the value will become 20M, and cannot be
- The wireless radio of the router can be enabled or
27