TP-Link TL-WR940N User Manual page 124

5 ) Right click
6 ) Change
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move
closer if it is currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
2 ) If you cannot find the PIN or PIN failed, you may choose
3 ) If it continues to show note of
Note: Wireless Password/Network Security Key is case sensitive.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than
usual to connect to this network:
•
•
•
Downloaded from ManualsNet.com
Wireless Zero
Startup type to Automatic, click
is Started. And then click OK.
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key. Usually you can only find it on the
label of your router.
security key instead, and then type in the
Key.
to confirm the wireless password of your wireless router.
Check the wireless signal strength of your network, if it is weak (1~3 bars),
please move the router closer and try again.
Change the wireless Channel of the router to 1,6,or 11 to reduce interference
from other networks.
Re-install or update the driver for your wireless adapter of the computer.
search engine
Configuration, and then select Properties.
Start and make sure the Service status
Wireless Password/Network Security
Network Security Key
Connecting using a
Mismatch, it is suggested
119