TP-Link TL-WR940N User Manual page 70

Chapter 4
• Diagnostic Tool
•
•
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is
successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case,
ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries.
• IP Address/Domain Name
Domain name (such as www.tp-link.com).
• Pings Count
• Ping Packet Size
• Ping Timeout
reply in the specified time, the connection is overtime.
• Traceroute Max TTL
3. Click
4. The
the following figure, the connectivity of the internet is fine.
Downloaded from ManualsNet.com
- Select one diagnostic tool.
Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
Tracerouter - This diagnostic tool tests the performance of a connection.
- Enter the destination IP address (such as 192.168.0.1) or
- The number of Ping packets for a Ping connection.
- The size of Ping packet.
- Set the waiting time for the reply of each Ping packet. If there is no
- The max number of hops for a Traceroute connection.
Start to check the connectivity of the internet.
Diagnostic Results page displays the diagnosis result. If the result is similar to
search engine
Configure the Router in Standard Wireless Router
65