Galanz XQG60-U108E After-Sales Service Manual page 40

1
2
3
拆除前盖板组件和门锁组件
Remove front panel and door lock
1、打开门组件用十
字批拆除螺钉 1、2
Open the door and
use the cross
screwdriver to exit
screws 1 and 2
2、把门组件抬起同
时取出门组件，做好
防护
Lift the door then
take out the door
3、用手拉伸门封 3，
取出外铁线，整理密
封圈到前盖板内
Stretch the door
seal 3 by hand, take
out the outer gasket
clamp, and arrange
the outer gasket
clamp into the front
panel
XYJGT6070UDE-002
1、 拆出的门组件做好
防刮花保护
The removed door
shall be protected
against scratch
2、 拆除螺钉时注意前
盖板不要刮花
When removing the
screw, pay attention
to the front panel not
to scratch
使用工具
Using tools
十字批
Cross
screwdriver
39