Enabling Or Disabling The Schedule Timer Notification Sound; Enabling The Button Operation Tone; Resetting Watch Settings - Casio 5686 Operation Manual

Enabling or Disabling the
Schedule Timer Notification
Sound
Use the procedure below to enable or disable
the schedule timer notification sound.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) 11 times.
This causes [BEEP] or [OFF] to flash on
the display.
4.
Use (D) to select [BEEP] or [OFF].
[BEEP]: Beep enabled.
[OFF]: Beep disabled.
5.
Press (B) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 5686
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
Press (C) 12 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4.
Press (D) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5.
Press (B) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.

Resetting Watch Settings

This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
Home City
easy viewing of the display and other
indicators.
3.
Press (C) three times.
This causes the seconds to flash.
4.
Hold down (A) for at least five seconds.
Release the button when [RESET] stops
flashing.
5.
Press (B) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Home City
Seconds
23