Using The Schedule Timer - Casio 5686 Operation Manual

Watch Operation Guide 5686
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While CASIO WATCHES is not
ー
running on the phone
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, adjust the hand
positions.
Adjusting Hand Alignment
l
If there is a World Time City specified
●
with CASIO WATCHES, its time will
also be adjusted automatically.
Auto time adjustment is performed at
●
the times described below.
After your phone's time zone or
ー
summer time setting is changed
After 24 hours or more have passed
ー
since the last time adjustment using
Bluetooth connection
After 24 hours or more have passed
ー
since city swapping using CASIO
WATCHES or watch operation
After 24 hours or more have passed
ー
since the last home city change or
time adjustment using watch
operation
Watch operation can be performed
●
even while it is connected with your
phone.
Triggering Immediate Time Adjustment
●
The watch's time setting is adjusted
automatically whenever you pair it with a
phone. Whenever you want to adjust the
watch's time setting based on your phone's
time, perform the procedure below to connect
with a phone.
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Move the phone close to (within one meter
of) the watch.
3. X
Hold down (D) for at least two seconds.
[CNCT] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] appears, and then the
watch adjusts its time setting based on
information from the phone.
Trying to connect
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Using the Watch in a Medical
l
Facility or Aircraft
The watch remains connected with
●
your phone even after time adjustment
is complete.
If time adjustment fails for some
●
reason, [ERR] appears.

Using the Schedule Timer

The schedule timer can be linked with the
calendar of a paired phone, so the watch can
display the remaining time of the currently
ongoing scheduled event and/or its ending
time.
Important!
The schedule timer becomes disabled
●
if you manually adjust the watch's time
setting. Before using the Schedule
Timer, connect the watch with your
phone and sync their time settings.
Connecting with a Phone
l
Note
After time
The schedule timer corresponds to the
adjustment
●
built-in calendar of your phone's OS
and Google calendar.
When a scheduled start time or end
●
time is reached, the watch will beep
and display an indication for one or two
seconds.
You can enable or disable the beep
sound as required.
Enabling or Disabling the
l
Schedule Timer Notification
Sound
Up to five scheduled events can be
●
sent from your phone to the watch.
Transferring Scheduled Event
●
Scheduled events can be transferred from
your phone to the watch.
While the watch is connected with your
●
phone, scheduled events are periodically
transferred to the watch automatically.
Check the connection
Make sure that the
●
the watch display when you perform the
procedure below. If
refer to the information at the link below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to transfer phone
scheduled events to the watch.
symbol is shown on
e
is not displayed,
e
10