Enabling/Disabling An Alarm Or The Hourly Time Signal; Turning Off An Alarm Or The Hourly Time Signal - Casio 3527 Operation Manual

To stop the alarm
●
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 20 seconds to let
●
you know when the alarm time is
reached.
If flash alert is enabled, display
●
illumination flashes along with the
alarm beeper and the hourly time
signal. Pressing any button to stop the
alarm beeper also stops the flash alert
operation.
Configuring Flash Alert Settings
l
Watch Operation Guide 3527
Enabling/Disabling an Alarm
or the Hourly Time Signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (D) to toggle the alarm or the hourly
time signal between on and off.
Each press of (D) toggles the displayed
●
icon between on (displayed) and off (not
displayed).
(alarm) or (hourly time signal)
Alarm
Hourly time signal
Alarm and hourly time signal off
Alarm beeper only
Hourly time signal beeper only
Alarm and hourly time signal on
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (D) to turn off the displayed alarm or
the hourly time signal.
Each press of (D) toggles the displayed
●
(alarm) or (hourly time signal)
icon between on (displayed) and off (not
displayed).
Alarm
Hourly time signal
Alarm and hourly time signal off
Alarm beeper only
Hourly time signal beeper only
Alarm and hourly time signal on
8