Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCHES causes the watch's World Time
City to change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Check the connection
Make sure that the
symbol is shown on
e
●
the watch display when you perform the
procedure below. If
is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
Note
CASIO WATCHES World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Note
You can use CASIO WATCHES to
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You must use
CASIO WATCHES to select a user city
as your World Time City.
Watch Operation Guide 5686
Configuring the Summer Time Setting
●
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
For information about summer time
●
periods, refer to the "Summer Time
Table" or CASIO WATCHES.
Swapping Your World Time and Home
●
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand Alignment
If the hands are out of alignment even though
the watch is connected with your phone, use
CASIO WATCHES to adjust them.
Check the connection
Make sure that the
symbol is shown on
e
●
the watch display when you perform the
procedure below. If
is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to correct hand alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Phone finder will not sound the tone
●
unless CASIO WATCHES is running
on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least two seconds to enter the
Timekeeping Mode.
2. X
Hold down (D) for at least five seconds.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Searching for phone
Phone search
3. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
complete
12