Enabling/Disabling An Alarm Or The Hourly Time Signal; Stopping An Alarm; Determining An Alarm's On/Off Status; World Time - Casio 5582 Operation Manual

Enabling/Disabling an Alarm
or the Hourly Time Signal
1.
Press (E) to scroll through alarm numbers
([AL1] to [AL5]) and the hourly time signal
([SIG]) screens until the one you want to
configure is displayed.
Alarm or hourly time signal
2.
Press (A) to toggle the displayed alarm or
the hourly time signal between on and off.
Note
Note that you will not be able to turn on
●
a schedule ([SCH]) alarm whose date
has already passed.

Stopping an Alarm

Pressing any button while the beeper is
sounding stops it.
Determining an Alarm's
On/Off Status
Turning on an alarm or the hourly time signal
causes the corresponding indicator to appear
on the display.
Hourly time signal
Alarm
Operation Guide 5582

World Time

World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Coordinated Universal Time).
Note
World Time cities that can be selected
●
only by using CASIO WATCHES
cannot be selected using watch
operations.
Configuring World Time Settings
l
Getting Ready
Enter the World Time Mode.
Navigating Between Modes
l

Checking World Time

Entering the World Time Mode will initially
display the name of the currently selected
World Time City, followed by the current time
in that city.
World Time City
World Time
To display the World Time City while in the
●
World Time Mode, press (A).

World Time City Setting

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Use (E) to display the city you want.
2.
To change the summer time setting, hold
down (A) for about two seconds. Release
the button when [AUTO] starts to flash.
3.
Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
4.
Press (A) to exit the setting screen.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with
●
CASIO WATCHES and then change to
a different city with a watch operation,
the CASIO WATCHES city information
will be deleted from the watch.
Configuring World Time Settings
l
13