Table of Contents
Advertisement
Enabling/Disabling an Alarm
or the Hourly Time Signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (B) to toggle the alarm or the hourly
time signal between on and off.
Each press of (B) toggles the displayed
●
(alarm) or
(hourly time signal)
icon between on (displayed) and off (not
displayed).
Alarm
Hourly time signal
Alarm and hourly time signal off
Alarm beeper only
Hourly time signal beeper only
Alarm and hourly time signal on
Watch Operation Guide 3523
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (B) to turn off the displayed alarm or
the hourly time signal.
Each press of (B) toggles the displayed
●
icon between on (displayed) and off (not
displayed).
(alarm) or
(hourly time signal)
Alarm
Hourly time signal
Alarm and hourly time signal off
Alarm beeper only
Hourly time signal beeper only
Alarm and hourly time signal on
Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds (24
hours).
When this maximum limit is exceeded,
elapsed time measurement returns to 0 and
timing continues from there.
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
B
Start
B
Stop
B
Resume
B
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
After first hour
Minutes, seconds,
Hour, minute, second
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.
8
Advertisement
Table of Contents
