Bin Control Switch - Hoshizaki DIM-40DE-HC Service Manual

Auger

17. BIN CONTROL SWITCH

1) Insert a flat blade screwdriver between the switch case and switch base, and lightly
pry the switch case off.
2) Use a Phillip's screwdriver to loosen the screw securing the microswitch and
remove the u-nut.
3) To refit the microswitch, fit the mounting
holes of the microswitch and switch base,
and secure them with the u-nut.
4) To refit the switch base, put the switch
case shaft (left) into the left side mounting
hole in the switch base. Use the u-notch
on the switch base to thrust the switch
case shaft (right) into the right-side
mounting hole in the switch base.
Motor Bracket
Machine Screw (Motor)
Ice Guide
Spring Pin
Joint
Machine Screw (Motor Bracket)
Machine Screw (Ice Guide)
Gear Motor
Motor Cover
Fig. 14
Switch Base
Microswitch
Switch Case
69
View with motor cover removed
Vinyl Tube
Fig. 15