Table of Contents
Advertisement
8. WATER PAN ASSEMBLY
1)
Remove the top panel and front panel.
2)
Remove the front panel and push the reset switch on the control box to open the
water pan.
3) Unplug the ice dispenser or disconnect the power source.
4) Disconnect the pump motor leads in the wiring channel.
5) Remove the two extension springs from the cam arms.
6) Remove the water pan brackets and the water pan assembly.
7) Remove the two spring hook screws from the water tank.
8) Remove the screws and the water pan brackets.
9) Remove the pump suction and discharge tubing.
10) Remove the pump motor bracket
from the water plate.
11) Install the new water plate or water
tank in the reverse order of the
removal procedure.
12) Replace the panels in their correct
positions.
13) Plug in the ice dispenser or connect
the power source.
INDEX NO.
1
Water Plate
2
Water Tank
3
Drain Guide
4
Spring Hook Screw
5
Water Pan Bracket (A)
6
Water Pan Bracket (B)
7
Pump Motor
8
Suction Tubing
9
Discharge Tubing
10
Lubrication Plate
11
Silicone Tube
12
Tie
6
13
DESCRIPTION
Fig. 9
1
2
8
60
3
5
13
9
7
11 12
10
4
15
14
Advertisement
Table of Contents
