[C] Display Mode - Hoshizaki DIM-40DE-HC Service Manual

[c] DISPLAY MODE

No Item
– n*, h*
n1 Freeze cycle time count
up (min)
n2 Freeze cycle completion
rate (%)
n3 Current cube control
thermistor temp
n4 Current ambient
thermistor temp
n5 Water temp (presumed)
n6 Current condenser
thermistor temp
h1 Last freeze cycle time
(min)
h2 Number of freeze cycles
h3 Total number of freeze
cycles
h4 Error log
h5 Software version
h6 Default model code
21 min or 21%
-19°C
Water temp 13°C or more
Same as n3 and n4
If counted number of cycles is 162100
If 3 errors from latest to oldest are E4, E3, and E1
Ver. 1.0A is displayed as follows alternately for 1 sec ON and
0.5 sec OFF
Set model codes from "00" to "FF" (hexadecimal, 256 patterns)
29
Display (example)
100% (last 2 digits only)
Water temp less than 13°C
21 min
24°C