[B] Replacement - Hoshizaki DIM-40DE-HC Service Manual

[b] REPLACEMENT

1) Unplug the ice dispenser or disconnect the power source.
2) Remove the front panel.
3) Remove screws and the control box cover.
4) Pull out and remove the controller board from the control box.
5) Install the new controller board and reassemble the control box in the reverse order
of the removal procedure.
6) Replace the panel in its correct position.
7) Plug in the ice dispenser or connect the power source.
1 Control Box (A)
2 Control Box (B)
3 Tapping Screw
5 Board Support
6 Controller Board
7 Transformer
8 Power Relay
9 Tapping Screw
10 Capacitor
11 Tapping Screw
12 Capacitor
13 Fuse Holder
14 Fuse
15 Grommet
16 Grommet
17 Machine Screw
18 Cube Control Thermistor
19 Tie
20 Control Box Cover
21 Control Label
22 Fuse Label
23 Wiring Label
Fig. 12
66