Cam Arm; [A] Cam Arm (A) - Actuator Motor Side; [B] Cam Arm (B) - Rear Side - Hoshizaki DIM-40DE-HC Service Manual

12. CAM ARM

[a] CAM ARM (A) - ACTUATOR MOTOR SIDE

Refer to "10. ACTUATOR MOTOR".

[b] CAM ARM (B) - REAR SIDE

1) Remove the top panel and front panel.
2) Remove the front panel and push the reset switch on the control box to open the
water pan.
3) Unplug the ice dispenser or disconnect the power source.
4) Remove the extension spring from the cam arm (B).
5) Remove the split pin from the cam shaft.
6) Remove the cam arm (B).
7) Install the new cam in the reverse order of the removal procedure.
8) Replace the panels in their correct positions.
9) Plug in the ice dispenser or connect the power source.
63