Procedure Of Function Settings - Mitsubishi Electric KD Series User Manual

5-2-1 Procedure of function settings

"Device discovery"
Send Initial settings
Input Sync. Signal ※
⑦Dark Correction ※
LED Control (ON)
⑧White Correction ※
Start data output
TM－XJ101C
5-2 Procedure of function settings
①Initial Setting Select1
②Initial Setting Select2
③Output Mode Setting
④Switching Resolution
⑤Sync Signal Setting
(Internal/External)
⑥LED Control
⑦LED Setting
/⑭Electric Shutter setting
⑯Output width setting
※When using Dark/White
Correction, please provide
continuous External Triggers or
select Internal Synch mode.
Output external illumination sync
trigger signal for CXL series
⑩PGA
⑪Line Adjustment
⑫γ correction
⑬Mono output mode
⑮Overwrap output setting
[Procedure of function settings]
1) This product contains several image processing function
that can be controlled over CoaXpress® I/F.
2) Procedure of several function settings is described on the
left chart. Change each respective settings for your
applications.
① Initial Setting Select1
② Initial Setting Select2
③ Output Mode Setting
④ Switching Resolution
⑤ Sync Signal Setting (Internal/External)
⑥ LED Control
⑦ LED Setting ⑭Electric Shutter Setting
⑧ Dark Correction
⑨ White Correction
⑩ PGA
⑪ Line Adjustment
⑫ γ Correction
⑬ Mono output mode
⑮ Overlap Output
⑯ Output width setting
3) Control several functions (such as White and Dark
Corrections) white monitoring a time-dependent output-change
in a continuous operation.
[Remark]
1) When using Dark/White Correction, provide continuous
External Triggers or select Internal Sync. mode.
2) Generate your Dark/White Correction data every time when
you scan your object.
CoaXpress® is a trade mark registered by JIIA (Japan Industrial Imaging Association).
64
© Mitsubishi Electric Corporation