3-2-1 Preparation by users
③ CoaXPress® cable
CIS (This product) has DIN1.0 / 2.3 connectors.
【L4/L5】
【L6】
Check the connectors of Grabber board (DIN1.0 / 2.3 or
BNC) and prepare the connectable cables.
④ Frame grabber board
Prepare Frame Grabber board (or PC with Grabber board
installed) supporting CoaXPress® .
【Remarks】
CIS does not support PoCXP. Set the Frame Grabber
board settings as NOT to supply +24V power to the
CoaXpress® cable.
TM-XJ101C
3-2 Preparation
CoaXpress® is a trade mark registered by JIIA (Japan Industrial Imaging Association).
⑤ DC5V power
Supply more than the current capacity listed in below.
No.
Configuration
1
KD-CXL series
Current capacity (A)
L4
L5
L6
22
26
34
49
© Mitsubishi Electric Corporation