Mitsubishi Electric KD Series User Manual page 21

【Data output timing】
Line frequency
1 line
LED turn-ON
Internal read-out period
Storing period
Digital output
TM－XJ101C
2-2 Principal technology of CIS
Read-out period
N lines latency
【Data output timing】
There is a latency to read-out a line data. The N-line latency is
designated from a timing of LED turn-ON as described on the
left drawing.
1) Sensor ICs converts the light information into the electrical
signal (1 line)
2) Period to read out the analog data of sensor pixels (1 line)
3) Period to convert the analog data into digital data and
rearrange the data position of each pixel in scanning
direction (1 line)
4) Period to process internal image processing (3 to 10 lines)
Data read-out period
21
© Mitsubishi Electric Corporation