Extension Cord - Fein BOP6 Instruction Manual

OBJ_BUCH-0000000005-001.book Page 6 Friday, February 5, 2010 8:57 AM
en
6
Emission values for sound and vibration
Sound emission
Measured A-weighted sound power
level L (re 1 pW), in decibels
wA
Measuring uncertainty K
A-weighted emission pressure power
level measured at the workplace L
(re 20 μPa), in decibels
Measuring uncertainty K
C-weighted peak sound pressure level
measured at the workplace L
decibels
Measuring uncertainty K
bels
Vibrations
Mean vibrational value, in
2
– m/s
2
– ft/s
Measuring uncertainty K, in
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard.

Extension cord.

If the use of an extension cable
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cable, power loss
and overheating of the power tool. Other-
wise, the extension cable and power tool are
liable to electrical danger, and the working
efficiency is impaired.
(Two-figure – specifications as per ISO 4871)
, in decibels
wA
pA
, in decibels
pA
, in
pCpeak
, in deci-
pCpeak
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-
phase a. c., with only one power tool BOP6,
BOP10, BOP10-2 connected:
BOP6 BOP10
93
3
82
3
96
3
4
13
1.5 1.5
5
Min. conductor size Min. conductor
(A.W.G.) cross-section, mm
Max. cord length, ft Max. cord length, m
≤ 100 100 – 200 – ≤ 30
200 300
16 16 14 1.5
BOP10-2
93 93
3 3
82 82
3 3
96 96
3 3
3 3
10 10
1.5
5 5
2
30 – 60 –
60 100
1.5 2.5